Metal Automatic Rendering Machine For Dead And Sick Animals

Rendering Machine For Dead And Sick Animals​

If it is a batch cooking machine: regularly remove and clean all plugs, sleeves and joints on the front plate. If it is corroded, replace it. If it is a machine equipped with a pressure sensor: the welding current may destroy the pressure sensor. If you have to solder next to the machine, please ground the part that needs to be soldered. Otherwise: Remove the pressure sensor assembly and isolate the pressure sensor. Safety rules-personnel The buyer/user-in-charge must ensure that the machine personnel (operators, cleaning personnel, maintenance personnel, etc.) have the necessary background knowledge and are familiar with and understand the instructions for use. Only relevant staff can use this machine. When it is necessary to allow people who do not understand the function of the machine to access this equipment (for example, when it involves maintenance, consultation or display), please follow appropriate safety precautions. Security Rules-Operation Always ensure that the machine is used safely and that the machine is always in good mechanical condition. Before using the machine, perform all safety precautions and ensure that all safety equipment is in good condition, that is, the protective device, grille, cover, etc. have been completely fixed with bolts. Do not make any adjustments to the machine while it is running. When using the machine alone, it should be equipped with a main switch.

The cooking machine must not be damaged, bumped, or the like, as this will damage the equipment or affect its performance.

Before connecting to electricity:-Check whether the voltage and frequency are consistent with the parameters on the motor nameplate.

Only qualified personnel who have received clear instructions can operate the equipment. Ensure that there is no foreign matter (metal, etc.) in the barrel during operation.

Before supplying steam, it is necessary to check whether all flange connections are properly installed and whether the packing and bolts/nuts are tight.

All steamed The steam pipe must be flushed and cleaned before supplying steam to the steam system.

The operating pressure and temperature of the equipment are described in Chapter 1. Do not install the machine above the production line with higher pressure/temperature Device.

Jiangsu SunRise is not responsible for any damage and personal injury caused by exceeding the design value.

See machine When cleaning the exterior of the appliance label (nameplate), do not use a high-pressure cleaner to clean the electrical parts.

Never open the inspection door and the filling/draining door during operation.

If it is a batch processing machine: When conveying materials to the machine, make sure Ensure that the drain door is closed.

metal automatic rendering machine

sick animals automatic rendering machine

dead animals automatic rendering machine

Metal Automatic Rendering Machine For Dead And Sick Animals Images